NOTE :Makita reserves the right to change specification of products without notice. Standard equipment and specifications may differ from country to country. Some products published here may not be sold in your country.The contents of the leaflets can be different from current products since they are original.
High accurate, clean cutting.
FEATURES
Tip-Resistant Design
Sliding the lever prevents this tool from falling down towards blade case.
Depth Stopper for Splinter-free Cutting
Enables to easily cut a preliminary groove at a depth of 2mm (1/16") for splinter-free cuts.
Bevel Cut
Bevel Range :: -1 to 48 degrees
Precision Bevel Cut
Precision Bevel Cut
The position of cutting line is always the same
Close-to-Wall Cutting
Only 18mm (11/16") away from wall at minimum
Guide Rule (Sub Base) can be installed.
Guide Rule can be used as Sub Base by turning up side down.
SPECIFICATION
Continuous rating Input
1,300W
Capacity
at 90 degrees
56mm (2-3/16")
at 45 degrees
40mm (1-9/16")
at 48 degrees
38mm (1-1/2")
Blade diameter
165mm (6-1/2")
No load speed (rpm)
2,000 - 5,200
Dimensions
341mm x 225mm x 250mm
Net weight
4.1kg (9.1lbs)
Power supply cord
2.5m (8.2ft)
Standard equipment and Specifications may differ by country or area.
PDF LEAFLET / 780KB
